Zhengzhou Great Wall Heavy Industry Machinery Co., Ltd.
We guide customers to choose the best applicable device type and provide the advanced, energy-saving and practical technological process, and also we are responsible for the site planning and design.
Features:1. Simple structure low operation cost. Using the principle of stone strike stone , smaller wear.
2.Broken rate is high, energy conservation
3.With fine, coarse grinding function
4.Little affected by material moisture content, humidity can reach 8%.
5. Working noise is less than 75 db, less dust pollution.
6. Suitable for breaking medium hard, especially hard materials.
7. Products are cubic, packing density is big, a very small iron pollution8.Little wearing of the impeller, easy maintenance.
Vertical Compound Crusher is developed by combining the pre-breakage technology of domestic and foreign countries, and optimizing the key structure parameters. It is designated mainly for grinding of cement raw materials (limestone) and cement clinker in cement factories. Thus, a kind of ideal secondary breakage equipment is provided for technology innovation or new production line building in cement factories. It can be used for grinding middle hard ores such as iron ore, aluminum ore, grit stone, gypsum, blast furnace slag, coal gangue, phosphorus ore, and lump coal. Also, it can be used in the field of building materials, mining industry, metallurgy, coal and chemical industry.
| Model | Inside Diameter of Roller (mm) |
Feeding Size (mm) |
Output Size (mm) |
Capacity (t/h) |
Motor Power (kw) |
Weight (t) |
Overall Dimension (mm) |
| PFL-750Ⅲ | 750 | <100 | <5,90% | 8-20 | 45 | 4 | 2370×1100×1300 |
| PFL-1000Ⅲ | 1000 | <120 | <5,90% | 15-30 | 55 | 5.5 | 2680×1500×1400 |
| PFL-1250Ⅲ | 1250 | <150 | <5,90% | 30-45 | 90 | 8.2 | 2970×1900×1900 |
| PFL-1500Ⅲ | 1500 | <180 | <5,90% | 50-70 | 132 | 13.7 | 3400×2200×2100 |
| PFL-1750Ⅲ | 1750 | <200 | <5,90% | 70-100 | 160 | 17.5 | 3800×2360×2200 |
| PFL-2000Ⅲ | 2000 | <220 | <5,90% | 100-120 | 185 | 23 | 4590×2680×2300 |
| Model | Inside Diameter of Roller (mm) |
Main Shaft Speed (r/min) |
Feeding Size (mm) |
Output Size (mm) |
Capacity (t/h) |
Motor Power (kw) |
Weight (t) |
Overall Dimension (mm) |
| PFL-800 | 800 | 1100 | <50 | <5,90% | 5-15 | 22 | 2.1 | 2000×900×1650 |
| PFL-1000 | 1000 | 980 | <80 | <5,90% | 10-25 | 45 | 3.2 | 2700×1150×1800 |
| PFL-1250 | 1250 | 780 | <120 | <5,90% | 20-40 | 75 | 4.2 | 2900×1350×1850 |
Note: Any Change Of Technical Data Shall Not Be Advised Additionally